Specializing in Sales, Service and support
of Pre-owned Thermal Analysis
and Scientific Lab Equipment.

Finger Print Temperature & Humidity Chamber

Call for Price

Finger Print Temperature & Humidity Chamber

Models: TH-PF-100


-Small size and light weight.
-Compact design with high performance.
-Choose from 9 different model chambers based on size and temperature preference.
-The series comes in 3 different models based on temp.
and humid. ranging in -35C to 150C, -20C to 120C, -0C to 120C / upmost 20 to 95% RH and three different volume capacities of 20L, 65L, 100L.
-Efficient system with durable materials.
-The evaporating system for better thermal efficiency with corrosion-resistant materials.
-The heating system with minimized potential heat when heating or cooling for prompt reaction time and advanced performance.
-Water tank for easy water supply.
-Maintenance can be done easily from the front side.
-Viewing window.
-A tempered glass window provides a clear view of samples in the chamber, beneficial during testing.
-Cable port for external probes or wires.
-50mm diameter cable port comes standard on the left side of the unit. Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)
Optional stand for space-saving layout.
-For use in limited spaces: stand and casters.
-Leakage breaker for power supply.
-Over current protection.
-Overheat protection.
-Switch-off after alarm for over heating.
-Door open alarm.
-Water empty alarm. (TH-ME / TH-PE)
-Microprocessor PID control / Auto-tuning / Calibration.
-Digital LCD display with touch-sensitive keys.
-Easy operation with wide LCD screen.
-Temperature and humidity / timer settings and operating condition.
-Program patterns are memorized for 10 years due to a battery built into the PCB.
-Expansion parameter inputs. (displayed by letters)
-Programming operation
-Computer interface. (optional)
-Software provided
-Save data in excel format.
-Storage of program information, backup of value settings / recovery, and temperature and humidity values.
-RS-232C port as standard offer.
-Chart Recorder. (optional)
-6 point dot type recorder with digital display.
-RS-485 communication port offers a maximum of 9 temp. and humidity chambers to be connected by one PC. (optional)


Model #: TH-PF-100

Chamber Volume (L / cu ft) 100 / 3.53
Controller - PID control (LCD Type)
Temperature Range (C / F) 40 to 100 / 104 to 212 without humidity
Temperature Fluctuation (C / F) at 100C 0.5 / 0.9
Temperature Variation (C / F) at 100C 0.5 / 0.9
Humidity Range (%RH) FULL RANGE : 50 to 90 at 40C, 65 to 95 at 50C, 50 to 90 at 90C
Humidity Fluctuation (%RH) 3
Humidity Variation (%RH) 3
Heater Material - Ni-Cr Wire Heater / SUS cartridge Heater
Drying Bulb 400W
Humidity Bulb 400W
Temperature Sensor - Pt 100
Humidity Sensor - Electronic sensor (free of drying a wet pack and good response time)
Air Flow - 2 set of sirocco fan (60W)
Interior Material - SUS #304 (2B polish)
Exterior Material - SUS #304 & Steel, 1t, Double painted & baked
Insulation Material - Polyurethane (70mm)
Door Material - Glasswool
Water Tank Capacity (L / cu ft) 9 / 0.32
Water Tank Quality pH6.2 ~ 7.2, Electrical conductivity 20microsiemens / cm to below
Viewing Window (mm / inch) 280430 / 11.0216.9
Cable Port - Basically one hole provided / 50mm (2inches)Optionally max. two holes available/ 50 or 80mm (2 or 3.2inches)
Interface - Basically RS-232C [RS-485 [Maximum 9 Units Control] - optional]
Dimension (WDH):
Interior (mm / inch) 500380530 / 1.971520.9
Exterior (mm / inch) 6708451045 / 26.433.3 41.15
Net Weight (kg / lbs) 115kg5kg / 253.511
Electrical Requirements AC230V, 1ph, 60Hz 4.5A
Electrical Requirements AC230V, 1ph, 50Hz 4.3A


Viewing Window
Inner Door
Temperature Recorder
Cable Port
Warning Signal Light

  • Model: Environmental Chamber
  • 100 Units in Stock

This product was added to our catalog on Thursday 20 June, 2013.

Your IP Address is:
Copyright © 2019 RT Instruments Inc.. Powered by Zen Cart